PROPHET64 & MSSIAH Userforum

Based on several  C64 Joystick Schematics and MSSIAH user manual
I fixed this a little knob board.

Download Schematics, Layouts
http://flierwall.com/misc/mssiahtop.xps
http://flierwall.com/misc/mssiahbot.xps
http://flierwall.com/misc/mssiahslk.xps
http://flierwall.com/misc/MSSIAHKnobBoard.bmp

Features.

** Adapter **
8 Din Input Adapter and 5 Din Input
Video Source Switch ( Pin 8 or 1 )
-> S-Video 4 Mini Din
-> RCA Output: Left, Right(Sid2Sid Out), Video
-> RCA Input: C64 Wave in ( Pin 5, 10 Ohm Input, 2M Gnd Resistor), Sid2Sid In, Direct Audio Thru
-> Stereo Headphone Jack ( L Sid1,  R Sid2 )

( RCAs makes it much easyer to add signal converters. )

** Controller **
4 knobs.  ( 500k Pot Dividers 0V to +5V ) X1, Y1, X2 Y2 -> Connected to right side with 2x 4 Mini Din ( Safety Feature )
Joystick with 5 buttons, Forward, Back, Left, Right, Fire, X2, Y2 Pots.( D-SUB Female )

Don't do things you do not understand.I do not carantee any safety with this piece of board. Do it by your own risk.

I wish you could study the schematics and the board completely before even thinking of using this.

The parts of this board can be found from these:
http://digikey.com
http://mouser.com
http://www.banzaieffects.com

I let you design the box how ever you wish.  Send me pictures of ready made ones. I would love to see how they come up!

Last edited by ACrIkeD (2010-05-27 23:18:23)